Reply to thread

Message: [QUOTE="dthompson, post: 1145886, member: 4901"] Doing a swap from a 96 van into a 01 Super duty. Swapped everything over except the front cover. Put it in, and start cranking and oil is coming from where the oil cooler bolts to the front cover. I used the truck oil cooler. The ends are slightly different between the van and truck. Pulled it off tonight and didn't see anything where it bolts up, and the gasket appears ok and it was tight. pulled the lower radiator hose off the water pump and it was full of oil. There was no coolant in it when I started cranking. I'm having a hard time understanding what has happened. [/QUOTE]

Verification

Random media

IMG_20160826_242640634

0041

axle_ratio_tag

2006 Lariat Custom truck McIntosh Sound System, Pipe Fitters Truck.

Wellheads

6553C45D-EC91-4078-9818-02B535CA2CF1

IMG_20130603_143152_263

2012-08-01_21-55-28_938

390331_211912865568083_100002481131528_446615_649574754_n

OilField Pictures

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 443 (members: 0, guests: 443)

Top