Reply to thread

Message: [QUOTE="Morgan@Midwest Diesel & Auto, post: 1379956, member: 8143"] If you guy have the old beakers that have round holes, then you need to slot the holes. The new brackets have slots in there for more adjustment. Because we were finding more inconsistencies between trucks. So by adding adjustment slots to the design for the three mounting bolts, you have plenty of adjustment. I would gladly modify them for you guys if you wanted to send them in. Otherwise of you have access to a mill or die grinder you can make them yourself to provide enough forward movement to align the belt. When aligned properly, there is no reason to have the belt running off the pulley. The new pulleys have a lip on them and will not allow it to run off either. Sent from my iPhone using Tapatalk [/QUOTE]

Verification

Random media

photo_36_

Transmission pan

6E3B3BE7-066B-4DFC-AFA8-AD62EE5999A8

My 01 F-250 7.3l

after1

joe_hueser_black_back

IMG_20130426_101656_106

securedownload_1_6_

IMAG1039

step_12-2

17_4

he351ve

Latest posts

Truck slipping into 4th
- Latest: Powerstroke Cowboy
- Today at 1:27 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

No members online now.

Total: 743 (members: 0, guests: 743)

Top