Reply to thread

Message: [QUOTE="sootie, post: 1486771, member: 8162"] For the Borgs, the frame size is dictated by the first number, all S400s chargers (467.7, 480, 488 etc) are the same frame regardless of compressor or cover. However depending on what cover you buy (standard or race), that changes external dimensions on that side of the turbo. That other thing that may pose a challenge when 3d printing is orientation of the cover. Almost never are the turbos installed the way they come out of the box. It takes clocking to get it just right. NOW if you could 3d print to haves that mate using the v band clamp that comes on the turbo, that would be the cat's meow for mockup purposes! [/QUOTE]

Random media

Recon box

IMG_3517_1_

EGT, boost, fuel PSI

eleanor_dash_1_

Tweeter extenstion

Stitch

IMG_3520_1_

6_0_intake_hydro_dipped

intercool4

My 2011 F250 Lariat

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Today at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 988 (members: 0, guests: 988)

Top