Reply to thread

Message: [QUOTE="strokin'_tatsch, post: 113597, member: 7"] O ring is a groove cut in head and install a metal "o ring" that will press on top of the stock fire ring that comes in the head gasket. The fire ring being the metal ring in the head gasket that seals around the cylinders Fire rings use a deeper groove in the head or block and instead of relying on the stock fire ring in a head gasket being further squeezed by an oring, you completely cut the fire ring out of the gasket. The fire ring you install is he only seal you have, eliminating the weaker fire ring in the head gasket, allowing for higher boost numbers and more heat without blowing. [/QUOTE]

Verification

Random media

OBS Fleet

Swamps Timing 1

flow_thru_2

tank

new_grips1

12345

DA73B779-98BC-426F-8EEB-8BEE927595C9

Latest posts

Gauge cluster face plates
- Latest: crash86
- Yesterday at 5:15 PM
6.0 Aftermarket
B
6.4 head gasket job cost
- Latest: bowhunter
- Yesterday at 2:07 PM
6.4 Aftermarket
S
6R140 surging issue
- Latest: Smokin 6.0
- Yesterday at 12:11 AM
6.7 Tech & FAQ
Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ
GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Jun 6, 2025
Engine and Drivetrain

Members online

Gregoryjak

Total: 279 (members: 1, guests: 278)

Top