Reply to thread

Message: [QUOTE="Ipkyss, post: 1323862, member: 1737"] Made some progress with my truck. I was swapping mufflers into the muffler ****** location of my flow pro exhaust because it was the easiest thing to do. What I have found to be the issue is the flow pro location was almost 32" from the bend that goes over the axle. Last time I changed it I cut the 5050xl into the exhaust as close to the axle as I could. Then put the fte resonator right at the cross member which left a short piece of pipe between the two. I did this as you want a resonator as far forward as possible and a muffler as close to the exhaust exit as possible. So today I was thinking that I never tried it with just the muffler all the way back by itself. Removed the fte resonator and left the 5050xl all the way back at the bend that goes over the axle. Result was very good. To my surprise there is almost no droan. Only a little around 1100-1200 rpms. I would say its about as loud as you can get with a good tone. Very little hiss and quite a bit of turbo noise. I really can't believe how much it changed from moving the same muffler 30" back in the same exhaust. [/QUOTE]

Verification

Random media

ccvpipe4

Trucksetup

untitled103

photo_7_

Always changing to make it a home on the road.

6.oh

306069_10152315048650381_179198954_n

20160616_163009

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

Total: 519 (members: 2, guests: 517)

Top