Reply to thread

Message: [QUOTE="Roccafellas, post: 1490698, member: 28554"] So I just got back from the machine shop everything going smoothly so far lol. Knock on wood! The blocks painted Crank and pistons basically the short block is put together I just brought the upper and lower lower oil pan. I was standing there looking and noticed that they took the high-pressure fuel pump out and I was wondering to look at the wires so I grab the actual harness that sits underneath the cover and I looked at it and as I'm talking to the guys telling them that you know sometimes these wires chafe cause problems sure enough I look at the wires and they're both chafed I mean bit right through down to bare metal they both looked at it and were shocked so I'm wondering if maybe that caused a problem what are the odds though the guy that I bought to use Block from gave me an updated harness with the loom on the wires so we're going to use that but just as I was telling them I look and I see that it chafed the wire I wonder if that could've been the problem! Sent from my iPhone using Tapatalk [/QUOTE]

Verification

Random media

20140828_124157

photo_7_5

IMAG0321

my truck!

11T0007_2011_FORD_F250_Manufacturers_View

20170502_212549

ngauge_front

My 6.0 excursion

Door harness plugs

97psd5

6_7IC_comparison

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

Total: 925 (members: 2, guests: 923)

Top