Reply to thread

Message: [QUOTE="Lipka101, post: 1462116, member: 14120"] I'm working on a friend's 6.0. Truck has codes for glow plug circuit on cylinders 5, 2, 4, 6, and 8. So far I've tested the glow plugs and all of them ohm out at 5.6- 5.7 except one at 57 ohms. Last week I changed out #4 because it was at 51 ohms. At the time #4 was the only code. Pulled the connections off of the gpcm and the black connector has seen a little bit of heat on the big pin and a little of the plastic is melted. Still has good connection. Can anyone tell me if I'm looking at a gpcm problem or multiple glow plugs failing? I've read conflicting info on glow plugs saying if they are below 10 ohms they are fine and some say it should be .5 to 2 ohms. Sent from my SAMSUNG-SM-G890A using Tapatalk [/QUOTE]

Verification

Random media

IMG_20140307_091422_645

HPP_2006_Polaris_900_RMK_159

Punisher_s_1st_Photo_shoot_012

Excursion

befor an after

Minotaur Parameters

2012-05-04_11-04-19_310

2015 F350 Before

no_limit_6_0_kit

just finished my grill

Latest posts

9
OEM LED sport headlights
- Latest: 99fordman18
- Today at 8:15 AM
2017+ 6.7 Aluminum Super Duty
10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- May 7, 2025
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ

Members online

Poison_amoni

Total: 485 (members: 1, guests: 484)

Top