Reply to thread

Message: [QUOTE="6.0 Tech, post: 1462273, member: 23001"] Glowplugs should be less than 1 ohm to ground typically. You will need all thr glow plugs it looks like. Also do the harnesses, as they like to break when you pull them apart. Also check with a test light for voltage going to the glow plugs using the harness side to ground. If you dont have 12v, find the issue. More than likely the gpcm, but could be harness. I like to test glow plugs ans the harness with a test light, as it load tests the circuit. Do not use an led test light though, as they need hardly any voltage at all tooperate. [/QUOTE]

Verification

Random media

5722

2012-03-01_22_17_071

Side

new_badge

AC gauge

215254_144439528957758_100001751344127_260193_2264535_n

Smokyred

ADautopsy1

interior

08 mirror comtrol

Latest posts

9
OEM LED sport headlights
- Latest: 99fordman18
- Today at 8:15 AM
2017+ 6.7 Aluminum Super Duty
10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- May 7, 2025
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ

Members online

No members online now.

Total: 1,414 (members: 0, guests: 1,414)

Top