Reply to thread

Message: [QUOTE="Arisley, post: 1179811, member: 67"] OK. barirng the motor over with the injectors out will clean the cylinders, but with the injectors out, they can refill. Install injectors, pull glowplugs. Ohm them out while you have them in your hand. If you have to replace one, just do yourself a favor and replace them all. With the glowplugs out, set the valve covers on and finger tighten a couple bolts on each one. Bar the motor over two complete revolutions, that will purge the cylinder of the worst of the fluid. Make sure the 42 pin connector is not connected, and hit the starter for about 4 or 5, 5 second hits. Slap the injector in there and bust it off. Check on Swamps websight, he has some awesome directions for replacing injectors and not killing your motor. [/QUOTE]

Verification

Random media

579

2011_darth_vader

6_7_CAI_1_

13_icon_lift_1

#One

Fitting_dimensions

5722

Magneto_front_v2

Real Trucjs

Latest posts

Won’t start issues
- Latest: psduser1
- Yesterday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Yesterday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Yesterday at 6:57 PM
6.7 Tech & FAQ
Y
2001 Ford F350 7.3 l powerstroke diesel windshield washer fluid reservoir
- Latest: Yojih123
- Yesterday at 12:15 PM
7.3 Tech & FAQ
s364.5
- Latest: htsummers22
- Saturday at 10:54 PM
Want to Buy

Members online

No members online now.

Total: 699 (members: 0, guests: 699)

Top