Reply to thread

Message: [QUOTE="Dieselfarmer, post: 518249, member: 3894"] Things that have been brought up: - Is the output spline of the auto the same as the output spline count for the zf6? If so then the transfer case should bolt up, if not then you will need a new input shaft on the transfer case. - driveshafts: big deal if they do not fit, which is hard to say if they will or not. May have to either find a set off a manual cc/sb (almost impossible) or have two custom made. $$$$ Those are the two biggest things I can think of off the top of my head. There are more to look at. you still suck [/QUOTE]

Verification

Random media

eleanor_part_two_7_

White truck

2006 rmk 900

102_0243

03dually

IMG_20141026_244133_441

makeover

2010 bed

118010A_1

IMG_20130430_194645_681

Latest posts

2010 headunit
- Latest: glog
- Yesterday at 1:17 PM
6.4 Tech
10R140 failure
- Latest: Sterling6.7
- Tuesday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 203 (members: 0, guests: 203)

Top