Reply to thread

Message: [QUOTE="jwlandry, post: 323746, member: 33"] Been awhile since I've updated this thread. Everything is going as planned. A little slower then though but that's all my fault. The motor has been to the machine shop to get the wall thicknesses checked so we can see how large we can go on the piston. The dampner has been ordered from fluid dampner. It's on back order till June 13th. The piston pins are being made as well. They will be 125grams lighter then stock. From 390 down to 266. There was also a flexplate show up in Florida last week as well. The pistons should be getting made in the next few weeks and a torque plate is on the way from California. Only thing left to figure out is a cam and how we are going to do the intake plentums. Everything else for the most part is laid out. Turbo is a 4294 that I bought from PowerstrokeJunkie about a yr ago Mount will be a turbonetics t4 Injectors will be 300/200s from Tim @ PIS tuning will be from Doug then live tuned from johnathon at beans or bill at php Trans will be BTS or one from ATF down there by Doug. [/QUOTE]

Verification

Random media

169815_1660981239184_1076760051_1781960_6725912_o

Headstud impact gun

stevie

intake elbow upgrade

IMG_20170126_081939994

dukes

My 2011 F250 Lariat

F250 King Ranch

20140930_185558

49879E51-01FB-4FF0-B0F2-F0EAEB74242D

Latest posts

9
OEM LED sport headlights
- Latest: 99fordman18
- Yesterday at 8:15 AM
2017+ 6.7 Aluminum Super Duty
10R140 failure
- Latest: PSD-BLACK-CLOUD
- May 9, 2025
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- May 7, 2025
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ

Members online

rusty1161

Total: 517 (members: 1, guests: 516)

Top