Reply to thread

Message: [QUOTE="Strokethis34, post: 987600, member: 2144"] Back in august 2013 I had a strange intermittent noise when warm from the bottom end. So I parked it until January of this year and started tearing into it. I found one lifter to have a Flat spot and the bearings were shot. It wore the lobe on the cam Down and a put a flat indention on the lobe. So far I have waiting to be installed: Billet stage 2 cam from Midwest diesel Billet pushrods from Midwest diesel Coated flycut pistons from Midwest diesel High rev. Valve spring from Midwest diesel Sinister reg return. (Debating on selling it and doing nates) A1 studs Rebuilt heads with hardened seats New glow plugs Block is .30 over and deck milled .07 Injectors are 175/75's going to holders to get flowed/rebuilt Turbo setup (undecided??) Ported intake from Nate Here are some pictures of progress. Have to pick up the block today or tommorow. Want to say thanks to Morgan at Midwest diesel for answering everything I had to ask and all of the parts! [/QUOTE]

Verification

Random media

2011-10-22_15-40-48_831

2008 6.4L pic8

IMG-20120802-00642

P6190006

IMAG0557

0615112051

FB_IMG_1524919591595

tran_720110116135837

FOT7672_1_

beachf350

Smokyred

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

No members online now.

Total: 1,064 (members: 0, guests: 1,064)

Top