Reply to thread

Message: [QUOTE="SkySki Jason, post: 27561, member: 1118"] I have soaked my engine, trans, undercarriage down with 50/50 Purple Power many times over the 300k miles I've put on my 7.3's. No issues with 'corroding' aluminum. Spray it on, blast it off 10min later. I use the pressure washer too! :eek: There is a generous amount of dielectric grease in every connector on my engine and I avoid blasting the ICP, GPCM and over near the PCM - but I don't even cover the alternator (I just don't blast it)! :p I generally spend more time on the underside of my trucks with the pressure washer than on the top. :p Oh, and I FIXED the asshat mistake Ford made when they made engine valley drain dump into bellhousing on my 6spd. There is now a tube that connects the drain to outside the bellhousing preventing my clutch from ever being contaminated again!!!! [/QUOTE]

Verification

Random media

rear_axle_12_

stolen2

ICP-DC_Swamps_StgII_175

IMG_20130406_180211_348

IMAG0020

Capone

Latest posts

02 F250 7.3 Will crank, WTS stays on, no start, no OBD
- Latest: Sterling6.7
- Sunday at 8:57 PM
7.3 Tech
P0087
- Latest: DEEZUZ
- Sunday at 11:49 AM
6.4 Tech & FAQ
2015-2019 6.7 HPFP New In Box
- Latest: lincolnlocker
- Jun 1, 2026
Engine and Drivetrain
First 6.0L (56k warning)
- Latest: adrianspeeder
- May 26, 2026
6.0 Tech
Extra external motor oil cooler?
- Latest: justinlogue5_0
- May 26, 2026
7.3 Tech

Members online

No members online now.

Total: 1,115 (members: 0, guests: 1,115)

Top