Reply to thread

Message: [QUOTE="me2, post: 360505, member: 3825"] I've given up on getting parts cut by someone else for a reasonable cost. I'm not going to spend $60 to $110 for every piece I need cut, especially when they are as small and trivial as the parts I need. I am thus going to build a CNC plasma cutter and cut my own parts. I am sure it will get a ton of use and save me money in the long run. I hope to get a design for the CNC table together today and order the necessary parts before the weekend. While waiting for the parts to arrive, I am going to tear apart my engine and do the rods, frost plugs, etc. When the CNC parts come back I'll put together the table and then resume making the engine adapter plate and the exhaust manifold. Theoretically I could hand cut the adapter plate and exhaust manifold parts. I am very tempted to do that but a) I know that sooner or later I need a CNC plasma cutter and b) the quality of my hand cut parts would never match what a CNC cutter will do. I am off to research DIY CNC plasma cutters. [/QUOTE]

Verification

Random media

F8227A40-E816-4645-B3FD-37B51E8D8BA5

farm-charter_024

20151030_160615

amps

100904_1323091

13_emblem

Diesel

securedownload_1_4_

exit_2_5

Truck21

side view

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

6.0 Tech

Total: 809 (members: 1, guests: 808)

Top