Reply to thread

Message: [QUOTE="Ron's Power Stroke, post: 701512, member: 835"] remove the exhaust outlet from the turbo.. cut/grind the 2 rivets holding the butter fly and remove the butter fly..on one end of the rod on the out side of the outlet you will see a tiny snap ring..pull it out and the rod should slide strait out.. some have to cut the rod in 2 and take it out in pieces.. plug the hole where the snap ring was with a 3/4 freeze plug... outlet is done..on the pedestal you need to remove the adjuster then pull the snap ring from the disk on the back side.. push the rod,springs and gaskets out though the back... tap the hole for a pipe plug and pipe dope or use a locking nut and bolt with some gray death...glad your trip went well... [/QUOTE]

Verification

Random media

110321_133033

Hydroboost and power steering

Best camo ever

29822_3970216809878_606567880_n

2008 6.4L pic9

IMAG0071

652_1056686425023_5315_n

03 7.3 ZF6

Latest posts

Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Sunday at 6:57 PM
6.7 Tech & FAQ
Y
2001 Ford F350 7.3 l powerstroke diesel windshield washer fluid reservoir
- Latest: Yojih123
- Sunday at 12:15 PM
7.3 Tech & FAQ
s364.5
- Latest: htsummers22
- Saturday at 10:54 PM
Want to Buy

Members online

No members online now.

Total: 711 (members: 0, guests: 711)

Top