Reply to thread

Message: [QUOTE="WhiteStroke13, post: 764426, member: 11501"] Alright guys, I need help ASAP. I was replacing my starter solenoid (on fender well) last night and before I could group the wires together the pole holding the majority of wires broke when loosening the nut. All the wires popped off and I already had the one side off. After that I kind of lost concentration on what went where. I have a 97 7.3 Turbo Automatic. What I am seeing is a large black ground wire from the starter to the engine bay. A large gauge red wire from starter to bay A small red wire that runs along side the larger gauge wire from starter I have 2 sets of white wires 1 set of Green Wires and a plug that goes on the small pole I think that is all. Can someone explain how to wire this up? I thought I had it right, tried it a couple different ways. I can get power up, power to dash, but when I turn to start I get NO noise. It sounds like the starter gets power when turning the key on. I need to use my truck tomorrow so its kind of an emergency situation. Thanks everyone! [/QUOTE]

Verification

Random media

2008 King Ranch motor work

eleanor_part_two_38_

edb6d3e0

2008 King Ranch motor work

20200531_191412

IMG_20150819_230121757_1_

motor3

psa_camo_back

IMAG0391

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 473 (members: 0, guests: 473)

Top