Reply to thread

Message: [QUOTE="TARM, post: 1057327, member: 578"] You really should change out that gasket (hpop to engine) no matter how good it looks. Also you have the HPOP out I would change a few other things just to be safe and hopefully take care of the leak issue. It likely is coming from one of the following: IPR o-ring One of the discharge outlet fittings o-rings Nonserviceable plug I would at least change out the IPR o-ring and the HPOP gasket. If it were me I would personally freshen it all up and replace the non-serviceable plug and swap out the orings in the discharge fittings. For under $100 you would know everything is taken care of. But I do understand some people do not want to spend money unless that have to. But anything under $100 in the diesel world is cheap in my experience almost like there is a unwritten rule. [/QUOTE]

Verification

Random media

IMG_20161130_080821591

IMG00073-20110224-1350

photo_14

Nerfs_Side_Close

Blue Spring vs Old Spring

supergay

O&G's 2011 F250 Journey

RSK 2.5"

Our 2.6 Sled Truck

Latest posts

2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
10R140 failure
- Latest: Sterling6.7
- Tuesday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 402 (members: 0, guests: 402)

Top