Reply to thread

Message: [QUOTE="Trohrer01, post: 980702, member: 12817"] Well I found out what the problem was. Kept showing a p0341 cam position code that I hadn't noticed before. Didn't think much of it at first because I was sure it was a fuel issue and I also couldn't find anything online about anyone having an issue with the cam sensors on 6.4s. but since the code kept showing up every time I cleared it I figured it wouldn't hurt to replace it and eliminate one possible problem. To my surprise I got a new sensor installed this morning and the truck fired right up, thank god!... Anyway I wanted to share the experience especially since this issue seems to be very uncommon and hard to find information about but apparently cam positions do go bad on these trucks, its just rare. Thanks again guys. [/QUOTE]

Verification

Random media

My 6oh

2008 6.4L pic3

2008 King Ranch motor work

Custom Ricky's Dash Mounts/H&S/Edge/Dashdaq

mickey thompson atz p3

Picture_736

9131DB15-CDA0-4EE0-8BC9-8E7AD1DA6C39

torque_an_me_10-11_020

1511MG-1601

Six.4

450R2

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 1,045 (members: 0, guests: 1,045)

Top