Reply to thread

Message: [QUOTE="Mhatlen, post: 1339786, member: 14173"] [b]Frame Stiffener[/b] I know this is a older thread but I have no doubts that the issue still exists. In fact it's very common with these trucks. I have had two 2006 F250 trucks and my first one had it bad. My current truck does not hop at 45-50 mph. But I reproduced this for my current truck because it drives so much better with it. Firms up the front end and truck tracks better and tightens up the steering as well as less body lean in turns. There are several threads in other forums that I have been involved with. Mainly on PowerStroke.org in the suspension forum. Called: My Theory on the SuperDuty Hop and possible cure. Or something like that......lol None the less this will cure that bounce and it actually starts where the frame goes to single C channel. Which is at the radius arm hangers and the leverage pulls up and down on the frame rails causing a bounce or resonounce in the frame. Like others have stated if the chassis were to get boxed in it would most like also cure this problem. But that is a ton of work and not very practicle. So if your handy with metal this is the answer.....guaranteed. [/QUOTE]

Verification

Random media

20121012_163537

08 6.4 Parts

Big_Red20

461789_4064732464854_1209175407_o

20190316_183601

Buster

BB3C04D5-BB5B-4F75-9207-BBD824089A43_4

2008 King Ranch motor work

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

No members online now.

Total: 660 (members: 0, guests: 660)

Top