Reply to thread

Message: [QUOTE="Mhatlen, post: 1339907, member: 14173"] You are correct, I made a plate that bolts on the inside side of radius arm hangers out of 1/2" steel. The OEM pivot bolt is long enough to secure it. Since the hangers have two 3/4" holes in them I put a bolt in the empty hole for 2 wheel drive trucks. Then it's 3" channel iron between the plates. Again 3" channel iron inside transmission crossmember all bolted with 3/4" bolts with the exception of the 1/2" approx studs off of transmission mount. I also put the metric nuts on there as well. The square stock tying it all together is 1" solid steel and connecting flanges are all 1/2" material. It's stout, extremely stout !! [/QUOTE]

Verification

Random media

2012-01-20_13-52-16_998

truckin

lift

Big_Red1

trucking_3

MBRP DP

2012-09-07_20-40-07_144

08 center console painted meddium pebble to match my 06

2012-10-13_18-10-24_385

102_0243

Latest posts

S
6R140 surging issue
- Latest: Smokin 6.0
- Today at 12:26 PM
6.7 Tech & FAQ
Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ
GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Jun 6, 2025
Engine and Drivetrain
Hard steer question/issue
- Latest: psduser1
- Jun 5, 2025
7.3 Tech
B
WTS/WIF light flash and stall issue
- Latest: blickcd
- Jun 5, 2025
6.0 Tech

Members online

No members online now.

Total: 360 (members: 0, guests: 360)

Top