Reply to thread

Message: [QUOTE="OBS-Addiction97, post: 1009903, member: 13998"] Truck Is a 97, mods are in my sig. The truck was running fine I drove it home and shut it off, went to start it the next morning and it wouldn't start. I changed the CPS with a BW sensor just to rule it out and still no start. My initial thought was my srp 1 took a carp. At the moment I have no access to a scanner so I'm working with what I have Available. Hpo res was full and I unplugged the icp and still no start. I went ahead a got a mechanical guage and length of hydraulic hose to thread into the hpo rail and I'm getting zero psi on the guage. So I think my srp is most likely the issue. I changed it out with my stock hpop and its doing the same exact thing. I even cranked the truck with the plug out of the hpo rail and no oil came out, the oil rail is actually appears empty. My ipr is maybe 7 months old and was replaced with a ford unit so it's unlikely that's it bad .. But anything possible. My train of thought is the PCM is telling the ipr to stay wide open. Any ideas on what would cause this ?? I'm working on getting a scan guage or AE ASAP so I can monitor what the PCM is doing. Thanks, AJ [/QUOTE]

Verification

Random media

cup

100409_211134

sst

A02437BE-98EE-46D1-8489-7BD09C0B10BD

13_light_bar

misc_2013_115

front_axle_swap7

my obs 7.3

Trucksetup

McIntosh amplifiers

2011-08-22_13-10-14_121

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- 20 minutes ago
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

Total: 911 (members: 2, guests: 909)

Top