Reply to thread

Message: [QUOTE="TooMuch03, post: 720120, member: 5993"] Yes, I ran the line through the front of the oil covers into the rails. If I had a later truck with wavy rails, I would use the ICP ports on the rails. That would be easier than drilling out and tapping the AWA fittings at the ends of the rails and trying to seal the valve covers, like I did. Since I was told it couldn't be done, I just had to do it lol. Mine pulls oil from the return line from my BPD oil cooler. I have an earlier style cooler so the block that replaces the factory oil cooler cover does not have built in pressure relief bypass that the new ones have. If my truck had a stock oil cooler, I would pull the oil from the test port fitting in the front under the intake manifold. [/QUOTE]

Verification

Random media

2012-08-17_19-49-37_434

Twin_K16-ATI

67ic1

Punisher_s_1st_Photo_shoot_005

new_badge

IMG_20130327_174431_727

line_of_fire

FullSizeRender1

TheStrip

100_0075

IMG_20150321_093503513

Latest posts

6R140 surging issue
- Latest: Sterling6.7
- Yesterday at 10:52 PM
6.7 Tech & FAQ
Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ
GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Jun 6, 2025
Engine and Drivetrain
Hard steer question/issue
- Latest: psduser1
- Jun 5, 2025
7.3 Tech
B
WTS/WIF light flash and stall issue
- Latest: blickcd
- Jun 5, 2025
6.0 Tech

Members online

Powerstroke Racer

Total: 208 (members: 2, guests: 206)

Top