Reply to thread

Message: [QUOTE="6.0 Tech, post: 1547431, member: 23001"] Get 2 qts of vc9. Fill the truck with water and the vc9. Run it for an hour or so. Then pull the petcock from the radiator, remove the little gose from the degas to the radiator, drop the starter, and pull the block plug on the passenger side. Its an 8mm Allen. Run fresh water thru it for half an hor or so, shut the hose off and let it drain everything out. Put the block plug back in, then pull the drivers side block plug, and run the hose thru it for another half hour or so. Then let it all drain again. Then pull the passenger block plug and let everything drain out. Reassemble everything, and fill with 4 gallons of coolant before you start with water. Use distilled water on the final fill once you get to that point, if youre using coolant that needs cut Sent from my VS988 using Tapatalk [/QUOTE]

Verification

Random media

IMAG0121

6_4_cold_air

Stone grey compared to 01 super duty grey

eleanor_wiring

6.7_VectorSeries

PMF track bar, overall

Picture_1206

6.7Intake

Latest posts

10R140 failure
- Latest: Sterling6.7
- Yesterday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Yesterday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Yesterday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Saturday at 8:30 PM
7.3 Aftermarket

Members online

No members online now.

Total: 957 (members: 1, guests: 956)

Top