Reply to thread

Message: [QUOTE="Laxman1306, post: 1542290, member: 32243"] So just got done installing my new motor and was hoping the boost issue I had the last time I started the truck before I tore it down was something wrong with the motor but It’s still not building boost. I did put a scanner on it and got code p2262 and p2263 which is a turbo performance failure... I did try another MAP sensor and it made no difference and the EBP sensor is working fine... I split the turbos and replace the gaskets between them and the seals that go through the elbow and small pipe under the fuel cooler.... the turbos seemed fine and spun freely and had now slop to them but I’m wondering if there is something wrong with the secondary precision turbo set up I have on it... any help with this issue would be great. This is the set up I have. [IMG]https://uploads.tapatalk-cdn.com/20200203/04ead2133c2824031e7b33905681b2e3.jpg[/IMG] Sent from my iPhone using Tapatalk Pro [/QUOTE]

Verification

Random media

601316_3501460595625_1132865701_n-1

20130302_145412

2011-12-11_16-18-53_375

2003_350

photo_14

dd_maximizer_hardware

Flo-Pro 6.7 delete kit

ccvpipe3

20150822_124931_2_

IMAG0072

Morimoto D2S 5.0 Projectors

2008 F250

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Yesterday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

Sterling6.7

Total: 828 (members: 1, guests: 827)

Top