Reply to thread

Message: [QUOTE="internationalthreat, post: 1385495, member: 25196"] Have a fully ******d 2011 6.7 thats giving me some issues and cant figure it out. Truck came in with a surge and rough run, checked codes and found P0336 ckp sensor code. I went through all the diagnostic steps and checked all the wiring, wiring was ok, PCM checked out ok. So i replaced the ckp sensor and checked it over with Rotunda and still no CMP/CKP sensor sync, but i have RPM signal. seems strange to me. Truck started to act up a bit again, i went to check the cmp sensor, so i unplugged and pulled the intake and cac pipe off. then i had to move the truck so i did and it worked flawless. put the truck back together and drove it, worked great, but still no CMP/CKP sync. Any ideas??? [/QUOTE]

Verification

Random media

My OBS E-Fuel system

exit_2_5

IMG_20130401_231902_550

Relay plug

199186_152853578107117_100001474272705_318526_4265251_n

IMAG0707

background

Recon box

screenshot_1_

IMAG0667

Latest posts

Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Sunday at 6:57 PM
6.7 Tech & FAQ
Y
2001 Ford F350 7.3 l powerstroke diesel windshield washer fluid reservoir
- Latest: Yojih123
- Sunday at 12:15 PM
7.3 Tech & FAQ
s364.5
- Latest: htsummers22
- Saturday at 10:54 PM
Want to Buy

Members online

No members online now.

Total: 398 (members: 0, guests: 398)

Top