Reply to thread

Message: [QUOTE="gnxtc2, post: 1509285, member: 1414"] You have to be careful with putting the junkyard HPOP in. You need to verify what year the HPOP they are so you can put the correct gasket in. I doubt you have 2 bad HPOP and 3 bad IPRs. Something is going on and you need to diagnosis what the issue is. Stop throwing parts at it, you will never find it. Put the pump back on that the motor was running. Once you do that, you need to fill the resevior with oil. Dead head the pump and utilizing the manual gauge, see how much pressure you had. If you have nothing, directly apply 12v to the IPR valve (make sure the valve is known working one and correct for the pump). Then check for pressure. BTW: where are you located? Billy T. [email]gnxtc2@aol.com[/email] [/QUOTE]

Verification

Random media

new dash lights

eleanor_part_two_37_

E99_Y

Big_R_Radio_Gospel_Channel

motor_w_manifold

IMG_20161130_080743835

pipes

1014120939

P6190007

P6190006

Trips

Latest posts

S
4r100 P0715/P0717 trouble codes.
- Latest: smokeybear73
- Today at 2:06 PM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Yesterday at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Saturday at 8:30 PM
7.3 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General

Members online

Total: 541 (members: 2, guests: 539)

Top