Reply to thread

Message: [QUOTE="todd31277, post: 896348, member: 7870"] try this copied and pasted from another site not sure it will work but beats paying a dealer if it does 1. Close all doors, then open your driver side door and press the Unlock button on the drivers door while it is open. 2. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. The door locks will lock and unlock to confirm that you have entered programming mode(Off is the position where you can remove your key, RUN is the position just shy of starting your car. If the door locks do not cycle you should try it again but faster. If they still do not cycle, your vehicle may not have keyless entry) 3. Within 8 seconds press any button on the first keyless remote to be programmed. Door locks will cycle to confirm programming. If you only have one remote then skip to step 5. 4. Within 8 seconds, press any button on the second keyless remote. Door locks will cycle again to confirm programming. Repeat step 4. for all other remotes. 5. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode. It's that easy! We have many other replacement key fobs and chip keys available for great prices. [/QUOTE]

Verification

Random media

Juanito's 05 F250 Harley Davidson, Rize, Bilstien, AFE, SCT, TOYO, XD, RBP,

truck1

Venturi

front_axle_swap4

bumper_idea

My first pics

step_14-1

Relay plug

P1000854

Latest posts

2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
10R140 failure
- Latest: Sterling6.7
- Tuesday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

DEEZUZ

Total: 714 (members: 1, guests: 713)

Top