no power

[chadott755]

i have a 97 f250 300000miles my factory fuel pump and ebv was leaking so i took all that off and put a fuel system on it and a s471 and now it has no power at all it barely moves the truck pretty much every sensor is new i have no idea what is causing the problems its completly stock except for the turbo and fuel system is it just not getting any air because the turbo is so big or what im lost

 

[purpleheart350]

Is it running rough or is it just not moving? Also have you looked to see of there are any soft codes.

 

[chadott755]

no codes and when u first start it it lopes like once or twice but i drive it everyday it just will barely get two 50mph and just slow as can be it runs smooth just no power at all

 

[mattman347]

You need some gauges. See what your boost is and EGT's are. Stock injectors huh?

 

[chadott755]

yea there still stock i had this charger on my other truck and i just had 160 100s with it and it ran pretty good i just bought this truck as a project so havent had time to put gauges injectors and a hpop yet just needed it to run right now

 

[chadott755]

also i dought if im even makin 5lbs of boost with stock injectors and stock tunning with that turbo

 

[mattman347]

I would say that may be contributing to your lack of power, no boost=little to no power.

 

[chadott755]

Yea I'm having my 6 pos retuned for this truck to see if just some tuning will help if it does help a little I'm sure it's just too big of a turbo for stock injectors witch is just what I'm hoping for

 

[smokedout250]

Your lope could ipr or icp or bad hpop..... No power could be caused from those as well.... Why did you put that turbo on? There's no reason for it


Sent from my iPhone using Tapatalk

 

[chadott755]

Both those sensors are new and I had it laying around off my other truck and the ebv was leaking on the stock one so I just put the big one on since it would be going on later anyways