Reply to thread

Message: [QUOTE="IHPowerstroke7.3, post: 1259631, member: 7642"] No worries, just trying to help too. I assume by code on the sensor you're talking about the part number? All numbers stamped on the sensors are what's called an "engineering" part number. Any Ford dealer can run that number and can give you the correct part number which will always be different. So whatever number came back as a pressure sensor would be correct. EBP is an exhaust back pressure sensor. Sometimes the tubes themselves get clogged with soot as well. I usually try to run a piece of say 18 gauge mechanics wire through the tube to clean the soot out. Sounds like you have already replaced the sensor, give it a shot and see how it goes. [/QUOTE]

Verification

Random media

The Rig

Built_Up_Motor_1

IMG_3517_1_

Duramax hauling grain truck

My OBS E-Fuel system

IMG_3520_1_

12_-_1

IMAG0574

Camo Feller 1

20140907_171124

FB_IMG_1524919687889

Latest posts

T
B&W hitch and shock removal
- Latest: TexMac
- Yesterday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Yesterday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Apr 23, 2025
7.3 Aftermarket

Members online

No members online now.

Total: 772 (members: 1, guests: 771)

Top