Reply to thread

Message: [QUOTE="Powerstroke Racer, post: 1389280, member: 13"] You can try the vacuum brakes the way it comes from the factory since it is already there and see how you like it, I did hydro boost because I used a 2000 engine and had no vacuum pump. The gear box will bolt right in but it is a larger diameter bolt 13mm iirc, I used 6.0 psd head bolts and machined spacers, you will need to drill the frame spacers to the larger size, I also used the brake lines and all from the SD chassis. There is also a frame width difference between the OBS and SD chassis of 3/4, some just bolt everything together and let the rubber take up the 3/8 per side difference but I made spacers for the from arm brackets and cut the perches on the rear axle since I had to roll the pinion and used the factory spring mounts. People use the obs gear box but pitman arm needs to be reamed, my thoughts were that if I use all 05 SD stuff and I need a lift or parts replacement on the side of the road I can use factory parts available at any auto parts store. [/QUOTE]

Verification

Random media

eleanor_part_two_63_

IMAG0667

tinted windshield

IMAG0678

95_Bronco_conversion_pics_015

2011-06-10_20-12-12_404

Adhesive for plastic

IMG_20171204_183321040

Minotaur Parameters

P6190009

Latest posts

S
6R140 surging issue
- Latest: Smokin 6.0
- Today at 12:11 AM
6.7 Tech & FAQ
Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ
GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Jun 6, 2025
Engine and Drivetrain
Hard steer question/issue
- Latest: psduser1
- Jun 5, 2025
7.3 Tech
B
WTS/WIF light flash and stall issue
- Latest: blickcd
- Jun 5, 2025
6.0 Tech

Members online

No members online now.

Total: 213 (members: 0, guests: 213)

Top