Reply to thread

Message: [QUOTE="Powerstroke Cowboy, post: 186999, member: 610"] Sorry guys I should have explaind what I did in the video.. First four seconds are dark. I left the cap on the lens, I let it idle for a little bit then kicked it up to high idle then back down and so on a couple more time's, The I reved it up to about 1900 to 2000 RPMs then back to a idle.. Then I shut the engine off. Let the ICP pressure clear on the screen. Theb tried to start it back up.. It would fire then die fire then die. Then quit firing all together.. BUT the gauge still would show ICP when cranking.. Just would not start.. To me the ICP looked good running and just cranking.. As for the IPR% the number the gauge showed, That would be the persent the IPR is closed right??? What I mean bu this is, the number it shows is the % of oil being used.. Am I right on this?? If so I would think the IPR% Looks ok to me.. I just need sombody to help that knows a lot more then me in this subject.. After all this is the first time for me.. [/QUOTE]

Verification

Random media

2008 King Ranch motor work

IMG_20150121_190450_462

2006 Lariat Custom truck McIntosh Sound System, Pipe Fitters Truck.

sam_an_dragster

old trucks

20170502_212523

Moto

Photo_Dec_14_1_31_48_PM

983C27CB-9ADA-4E33-B2DF-80CBFF8A98BF

2006 Lariat Custom truck McIntosh Sound System, Pipe Fitters Truck.

20170502_213150_1494904245060

Latest posts

Gauge cluster face plates
- Latest: crash86
- Yesterday at 5:15 PM
6.0 Aftermarket
B
6.4 head gasket job cost
- Latest: bowhunter
- Yesterday at 2:07 PM
6.4 Aftermarket
S
6R140 surging issue
- Latest: Smokin 6.0
- Yesterday at 12:11 AM
6.7 Tech & FAQ
Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ
GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Jun 6, 2025
Engine and Drivetrain

Members online

projectford

Total: 249 (members: 1, guests: 248)

Top