Reply to thread

Message: [QUOTE="6.0 p-stroke, post: 725151, member: 242"] I've been putting this project off for too long, so yesterday my dad and I decided to pull the engine back out and start making progress again. I took a BFH to the firewall to give more clearance over the last valve cover, I also used it to flatten out the bottom pinch weld so we can clear a bigger downpipe. I removed two unnecessary brackets from the engine crossmember and gave it a nice coat of paint. [ATTACH=full]112923[/ATTACH] Today we're gonna drop the engine back in and start making progress on modifying the tranny crossmember. Tomorrow the manifold and turbo will go on and then we can start the wiring and figuring out all of the a/c and power steering lines. [/QUOTE]

Verification

Random media

8_LUG_Bragging_Rights_July_2012

016_2_

Dual IPRs

2012-08-03_12-39-07_231

excursion_bumper

1E357261-4DE3-46FF-B2F8-1C67C4B83303

20151116_172104

ADcarbon2

20180408_150031

GT45R_install_pics_and_test_drive_020

Weight Reduction,one part at a time

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Yesterday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

No members online now.

Total: 779 (members: 0, guests: 779)

Top