Reply to thread

Message: [QUOTE="Strictly Diesel, post: 1076475, member: 1411"] Chris, The kit was designed to go FORWARD of the stock tank, and yes, it will fit between FRAME cross members. The only fitment issues we've seen are trucks with badly sagging body mounts, which will make the top of the bracket contact the bottom of the body/bed. If your bracket is hitting the bottom of the truck and is between the frame cross members, your options are to replace the mounts or to lightly dent the floor. I've made that bracket as low profile as I can. I assume you mean the oil pressure switch, use Figure 10 in this document to help you locate where it goes. This picture is showing the back of the engine, on the drivers side. The switch goes in behind the oil filter header, right below the up-pipe flange. I'm still working on the detailed instructions...not enough hours in a day! FWIW, please feel free to call me if you have any questions. You are likely to get answers much faster that way (unless it's a weekend). We are here M-F, 7a-6p MST...and I'm almost always here during those hours. [/QUOTE]

Verification

Random media

IMG_20170607_081955287

intake elbow upgrade

2013-03-21_16-56-09_370

hot_pipe_070612

Oral the Coal!

silver_truck_carriage_works

IMAG0539

20171227_153050

Latest posts

02 F250 7.3 Will crank, WTS stays on, no start, no OBD
- Latest: Sterling6.7
- Sunday at 8:57 PM
7.3 Tech
P0087
- Latest: DEEZUZ
- Sunday at 11:49 AM
6.4 Tech & FAQ
2015-2019 6.7 HPFP New In Box
- Latest: lincolnlocker
- Jun 1, 2026
Engine and Drivetrain
First 6.0L (56k warning)
- Latest: adrianspeeder
- May 26, 2026
6.0 Tech
Extra external motor oil cooler?
- Latest: justinlogue5_0
- May 26, 2026
7.3 Tech

Members online

No members online now.

Total: 2,338 (members: 0, guests: 2,338)

Top