Reply to thread

Message: [QUOTE="rusty1161, post: 1431612, member: 1386"] FWIW, here is how I ran the front cooler line for more clearance, and switched to 3/8" SD hardlines at the same time. 1- Edelmann 822560 fitting $11 on Amazon SD 3/8" hardlines You're going to need the adapter for the rear cooler line and the spacer. I ended up having the fittings from the SD bypass I tried to install, but didn't have the clearance. I bought the spacers that replace the bypass from Riffraff I believe. Here is the fitting [ATTACH=full]169285[/ATTACH] Here it is installed by itself [ATTACH=full]169286[/ATTACH] I connected the fitting to the cutback hardline with 3/8" trans cooler hose [ATTACH=full]169287[/ATTACH] Here is the hose/hardline setup [ATTACH=full]169288[/ATTACH] The front connections, by the radiator are straight forward. This was a fairly costly mod/mistake/search for a solution. I hope this helps others out with their OBS T4/E4OD swaps. I am sure there are other ways that are more robust or cleaner. Hopefully this works! Rusty [/QUOTE]

Verification

Random media

GT45R_install_pics_and_test_drive_020

Picture_175

step_12-2

photo_1_2

FullSizeRender

CIMG00271

phone_2017_631

456890_4064724424653_1889768556_o

jeep_front

New Headlights

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

No members online now.

Total: 508 (members: 0, guests: 508)

Top