Reply to thread

Message: [QUOTE="JSchuricht, post: 1008054, member: 5768"] The SD front shaft will work, that's what I use on my 95 ZF6 with a D60. For the rear I went from a auto to the ZF6 so lengths will be different but I had the front portion of the shaft shortened about 1" and a 1410 yoke installed. The simplest thing is to put your shaft up against the output on the SD transfercase once it's bolted up and measure the distance from the center of the hole on the shaft to the center of the hole on the output. I don't know if the entire SD rear shaft will work but at a minimum you will have to adapt the 1410 yoke on the shaft to the 1350 on the axle. You can do it with a hard to find crossover ujoint, replace the yoke on the shaft or the pinion. [/QUOTE]

Verification

Random media

raptor1

20170502_2123511

truck29

Cold_Stack

NL64PSHP

20160526_164013

Buster the wayward Boxer :)

TEXAS1

IMAG0030

d60

left_arm

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 463 (members: 0, guests: 463)

Top