Reply to thread

Message: [QUOTE="madpowerstroke, post: 454844, member: 5867"] I just wanted to share a little about some of the stuff I do when I'm bored at work. I just wanted to try something new to see how hard it would be to do and if it could be done. I by no means think that this intake would work better than the ones from absolute, or go go. Just something I wanted to try, and put on the truck, since I think alot of the members know I like to think out of the box. What if I took a 6.4 manifold and converted to a 6.0 manifold. I know the stock 6.4 flows more than the 6.0 stocker so why not? The runners of the 6.4 manifolds are basically about 1/4 thick or less, and the runners on the 6.0 are at least 2 inches thick. So now there is almost no runner at all and bam into the head ports, also the intake of the 6.4 holds more volume. So should be a fun experiment. Here's some pictures of the work so far, might have it done in a week or two depending on how busy I get at work. Give me your opinions on the project if you think yes it would work or no. I'm doing it anyway but I like to hear everyone input, and why on either way. [ATTACH]10098._xfImport[/ATTACH] [ATTACH]10099._xfImport[/ATTACH] [ATTACH]10100._xfImport[/ATTACH] Thank you and I'll try to keep the maddness going. [/QUOTE]

Verification

Random media

Turkey_Run_036

2011-04-20_14-50-31_741

1997 Ford F-250 Powerstroke

F-525

IMG_20130711_180257_891

photo_35

IMAG0574

Screenshots 2

Power for stereo system

2010 bed

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 573 (members: 0, guests: 573)

Top