Reply to thread

Message: [QUOTE="dmd, post: 1403091, member: 1848"] Mechanics on this board have said several times that the worn engines usually come from running synth oil. Not from the oil, it is fine. The problem is the contaminates. Just because you run synth doesnt mean that there are not the same contaminates as a good quality dyno oil.Folks like to run the synth too long and the engine wears from the junk in the oil. Way better to run dino and change at 5k, than run synth longer when the oil is a mess. Key is to get it tested the way you drive, then you will know when it needs to be changed and then take off 500-1000 miles and change it a little early. Oil is cheap compared to any lubrication related problems. [/QUOTE]

Verification

Random media

ms4

Kazakhstan

2012-01-21_17-29-52_123

1997 ZF5 DRW

DSCN3278

Screen_shot_2012-01-29_at_8_42_51_AM

before

IMG_20160816_203328890

3.5inch sd vs 3inch ranger

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 828 (members: 0, guests: 828)

Top