Reply to thread

Message: [QUOTE="PSM_Kid, post: 747095, member: 3059"] Oem head gaskets Exhaust manifold gaskets Rocker box gaskets Oil cooler New glow plugs and both harnesses 8 injector seal kits if you pull them out 6.4 banjo bolts 4 gallons of ELC concentrate fresh oil and filter inspect everything once its torn down (hoses, degas bottle, cac boots, plastic cac tube that goes to the intake manifold for cracks or small holes in accordion section, etc.) egr seal kit with turbo hardware 3c3z-9433-bj intake gaskets 3c3z-9439-aa x2 stc fitting kit new dummy plugs perform a thorough coolant flush before tearing it down and replace the coolant filter when going back together to prolong the life of the new oil cooler. [/QUOTE]

Verification

Random media

Picture_058

OUO 525

2008 King Ranch motor work

phone_pics_093

step_12

2008 King Ranch motor work

rear_axle_3_

B036FFCB-8E00-4E73-A776-B4C68ED6C218

SUBURBAN_DRIVER_SIDE

09 6.4

Latest posts

D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- Yesterday at 5:23 PM
6.4 Tech & FAQ
S
F-350 Dually tire size
- Latest: Smokin 6.0
- Yesterday at 5:14 PM
6.7 Tech & FAQ
Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Sunday at 6:57 PM
6.7 Tech & FAQ

Members online

No members online now.

Total: 552 (members: 0, guests: 552)

Top