Reply to thread

Message: [QUOTE="Wackerjr, post: 150527, member: 130"] did you get the harness for the trans to? or just the box? I am looking at the diagrams now.... I don't know why your asking for tps ground... it is not needed you should have one black wire on the pcs that is the ground just ground that to chassis. backup lights is going to be Black with Pink tracer. CPS is going to be dark green I believe.... (orange/black pcs wire) TPS is going to be I believe yellow/white (double check with multimeter) (yellow/black pcs wire) Any other button (od, cruise buttons for paddle shifting, toggles, etc) they go to spare digital inputs and will need to be setup in the program.... Also note, go into the speed and gearing chart of the pcs once it is all up and connected, and set the engine pulses to 24 or rpm will be off before you start to drive... [/QUOTE]

Verification

Random media

IMAG0308

IMG_20141026_244040_144

Nerfs_Side_Close

IMG_20140307_091422_645

Recon box

20140903_202223

20170409_175735

plati1

befor an after

Switch

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Apr 22, 2025
7.3 Performance

Members online

Arisley

Total: 806 (members: 1, guests: 805)

Top