Reply to thread

Message: [QUOTE="windrunner408, post: 880220, member: 1868"] Actually an injector's capacity is usually measured in "cubic millimeters". When they give it a "CC rating" that's when they flow test them with 1000 shots/cycles. So whatever size your injector is cut to (depending on whether you have open or closed spill ports of course) is pretty much all that that injector is capable of dumping in one stroke/firing of that cylinder. Let's take a "205cc" (rated) injector. If that injector completely empties itself in a firing event, it will dump ~205 mm^3 of fuel into the cylinder. So what Charlie is saying is, with 2.4ms of PW at 4000 psi of ICP, Jesse Warren found that ~240cc of fuel made it out the nozzle and into the graduated cylinder that the injector dumped into on the flow bench in 1000 shots. So that means that ~.240cc/mL will dump into each cylinder that fires when ICP is 4000 psi and PW is 2.4ms. Hope this helps. [/QUOTE]

Verification

Random media

s-l500

Family of strokers

vajj

the_babe

2010

my first diesel and first truck, project white out

My 2000 F250 7.3L

past & present

Our 2.6 Sled Truck

Latest posts

Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ
GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Jun 6, 2025
Engine and Drivetrain
Hard steer question/issue
- Latest: psduser1
- Jun 5, 2025
7.3 Tech
B
WTS/WIF light flash and stall issue
- Latest: blickcd
- Jun 5, 2025
6.0 Tech
T
2013+ steering gearbox in older trucks
- Latest: TPOLO
- Jun 4, 2025
Suspension, Drive Train, and Tires

Members online

No members online now.

Total: 247 (members: 0, guests: 247)

Top