Reply to thread

Message: [QUOTE="Tim @ P.I.S., post: 1385486, member: 744"] It truely is going to come down to who you bought them from. My chart says our 230/100's need 3.2 ms to empty all 230cc if you have 3000icp and 65psi fuel on the bench. The 250 will take roughly almost 4ms with everything else the same. With that said some modifications have to be done to get these figures. As we have tested from some popular shops a min of 5ms to get the 250cc to empty. And that only after slowing the bench down to simulate 1500rpm instead of the previous 3000rpm. Just because they all look shinny doesn't mean they function the same. [/QUOTE]

Verification

Random media

Out with the bad in with the good.

404497_3047082223674_457951947_n

2011-04-12_17-33-36_868

DSCF1079

6.4

Truck36

Underside Truck Photos

Zerk_adaptor

F250

Latest posts

S
6R140 surging issue
- Latest: Smokin 6.0
- Today at 12:11 AM
6.7 Tech & FAQ
Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ
GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Jun 6, 2025
Engine and Drivetrain
Hard steer question/issue
- Latest: psduser1
- Jun 5, 2025
7.3 Tech
B
WTS/WIF light flash and stall issue
- Latest: blickcd
- Jun 5, 2025
6.0 Tech

Members online

No members online now.

Total: 180 (members: 0, guests: 180)

Top