Reply to thread

Message: [QUOTE="ChunderDownUnder, post: 435155, member: 4953"] Im going to pull the front cover and undo those npt galley plugs and run my camera up the galley to the rear. Im sure those two at the rear are the first plugs I put in. But like I said Im starting to doubt my self. All other galley plugs and freeze plugs are in place. Clearances have been checked, double checked and triple checked and are in spec. I have blow air through every orifice and there is oil in all the right places through the engine. Pick up tube is OK although its is closer to the bottom of the pan than most. I really think it is either the lpop is completely shot , which it doesnt look like and is within spec, or that bloody valve in the oil filter head is my issue. I have taken that snap ring off but the blighter wont budge [ATTACH=full]93844[/ATTACH] [/QUOTE]

Verification

Random media

johnnykia

raptorbfg

6C7C4C68-7DE8-42F7-95EE-1D559C3877AF

avatar66_1

TEXAS1

20170122_124732

home speed test

IMG_20130328_194147_863

Photo_Dec_29_2_57_45_PM

0041

DSCN8403

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- May 7, 2025
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 502 (members: 0, guests: 502)

Top