Reply to thread

Message: [QUOTE="ToMang07, post: 466928, member: 4800"] [B][FONT="Times New Roman"][SIZE="3"]So, being the genius that I am, I had an idea today when I was in True Value... and I decided to spend the $10 on hardware. I purchased 2 bolts, 2 large washers, a flat-backed nut, small chain (1' is more than enough) and 2 eye/hook turnbuckles. Entire "mod" took 10 minutes. Basically, put the bolt through the washer, then through the existing hole in the plastic inner fender, right in the bottom-rear middle. Widen the end of the chain just enough to slip the bolt through, then put on the flat-nut. Cut the chain as short as you can while still able to hook to the turnbuckle. I used the open end of the turnbuckle to an existing hole under the truck (see pics) opened the other end of the chain and attacked it to the eye-side of the turnbuckle. Tighten, pulling back the fender. Easy as that. I went off-roading in my fields being sure to hit the bumps at full-turns, not even a slight rub. I just wish I thought of this months ago BEFORE my fenders started rubbing through. Anyway, no more concerned looks when turning in parking lots! LOL[/SIZE][/FONT][/B] [/QUOTE]

Verification

Random media

1220121410_1_

1E3FB10C-393D-4D7D-ACE8-8339AF30A8B3

62B7D3B2-6795-4B0D-8459-06EEA8583FBE

188529_1819025163015_6257882_n

Duramax hauling grain truck

IMG_20120113_140012-1

photo_21

Window_switch_front

FrontPTM

95_Bronco_conversion_pics_006

Fuel_system2

Latest posts

I must be getting old… Exhaust is too loud
- Latest: Derkperk
- Yesterday at 2:18 PM
6.0 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted

Members online

No members online now.

Total: 319 (members: 0, guests: 319)

Top