Reply to thread

Message: [QUOTE="4EverBoosted1, post: 947180, member: 4858"] Once you are done with the stripping process, the cover will now be ready for hand sanding. -- just a heads up. You should have about 3 hours of work behind you by the time you reach the hand sanding step... Hand sanding. You will start off with 320 and sand your A$$ off lol.. Sand and sand and sand until every imperfection is smooth and you have something like this: [ATTACH=full]131602[/ATTACH] Repeat that last step with 400 grit..... And then 600 grit.... And then 800.... And so on until you get to 2000 grit. And the more you sand and the more time you spend, the better the final outcome will be. Here is a picture after the 800 grit:[ATTACH=full]131603[/ATTACH] Finally.... Once you have rubbed all the skin off your fingers and you have finished up with the 2000, you are on the home stretch. Time to polish and let the mothers powerball do all the work. Unfortunately I was too excited to take pics of each step of polishing but I figured that was straight forward... Lather up the cover in billet polish and let the drill and ball do all the work. Wipe clean with a microfiber towel and enjoy all your hard work. Sit down and have a beer :) [ATTACH=full]131604[/ATTACH][ATTACH=full]131605[/ATTACH] [/QUOTE]

Verification

Random media

2012-04-04_12-59-40_73

Misc_042

screenshot

Boot

IMG_20170126_115756258_HDR

20200209_165912

6_4_billett_heads_3

silver_trucks

sept_29_10_171

20200209_165857

Misc_044

Latest posts

Hard steer question/issue
- Latest: psduser1
- Yesterday at 8:52 PM
7.3 Tech
B
WTS/WIF light flash and stall issue
- Latest: blickcd
- Yesterday at 6:23 AM
6.0 Tech
T
2013+ steering gearbox in older trucks
- Latest: TPOLO
- Wednesday at 11:09 AM
Suspension, Drive Train, and Tires
J
15 cab on 08
- Latest: jeretl
- Monday at 2:38 AM
Aftermarket Super Duty 1999 - Current
S
F-350 Dually tire size
- Latest: Smokin 6.0
- May 30, 2025
6.7 Tech & FAQ

Members online

No members online now.

Total: 473 (members: 0, guests: 473)

Top