Reply to thread

Message: [QUOTE="Hotrodtractor, post: 338365, member: 25"] There are quite a few places and people that have ported heads on 7.3s - as well as camshafts to match - Depending on the level of work done it is pretty easy to get several thousand dollars wrapped up into a set of heads. I reccommend talking to MANY shops about their port work and head flows - but before you do I also recommend you take a look around the net and read up on some of the ideas and thoughts behind that port work. Personally I don't look for the heads with the most flow - I look for the head with the most consistent port velocity and smoothest flow transitions through the entire runner - this can only be done so many ways - either on a wet flow bench - or the DIY "flying string" method. Basically you go in and remove and ADD material where needed to smooth out the flow and to remove all the little spots that might get little flow eddys in the runner - that to me is more important. [/QUOTE]

Verification

Random media

TS_Agri_power_front

20161028_080719

Dearden Triples WOP

VVASSUP Juanito's F250 05 6.0 Harley Davidson TOYO RIZE RBP SCT MBRP S&

Intake kit

2012-08-25_10-47-27_234

2013picstitch

20170502_212549

Tornado..

bed bolt

header wrap to protect the airbag

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 711 (members: 0, guests: 711)

Top