Reply to thread

Message: [QUOTE="Strictly Diesel, post: 423920, member: 1411"] There seems to be some confusion here, the fuel line in that kit is 3/8", not 5/8". 5/8 wouldn't work without a 5/8" pickup tube and different clamps and fittings. The filter should be a BF1212 with a water drain. Per step #31 of the instructions, it should have been pre-filled with fuel to help getting the system primed. Based on the experiments that the OP has already done (moving the fuel pickup to an external can and bypassing the filter and tank), I tend to agree that this sounds like a fuel pump problem. It's very possible that getting the system primed again, particularly if the filter wasn't filled with fuel, may have just been too much for an old 200k mile pump. I think that the video confirms that there is a volume problem (pump issue). With stock injectors, free-reving the engine shouldn't be dropping pressure that way. [/QUOTE]

Verification

Random media

5N95Ha5Md3K53Fa3M3c7h6e37db9169ea1f50

bryanstruck

2011-12-18_17-13-29_168

New shoes

472434_368013399986900_30235268_o

Photo0126_1_

420292_3117666428235_84825968_n

Front End

IMG_20110903_182414

previous F250 (07 6.0)

IMG_20130408_230956_997

6.4 powestroke fluidampr

Latest posts

F-250 & F-350 gear ratio question ?
- Latest: 6.0 Tech
- Monday at 9:17 PM
6.7 Tech & FAQ
D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- Thursday at 5:23 PM
6.4 Tech & FAQ
S
F-350 Dually tire size
- Latest: Smokin 6.0
- Thursday at 5:14 PM
6.7 Tech & FAQ
Won’t start issues
- Latest: psduser1
- May 18, 2025
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- May 18, 2025
7.3 Tech & FAQ

Members online

Andreasesu

Total: 575 (members: 1, guests: 574)

Top