Reply to thread

Message: [QUOTE="davey99ps, post: 251978, member: 777"] I've never pulled a 7.3 with a manual behind it, however ive done plenty of gas motors. You do not have to drop the tranny, undo the bellhousing bolts as usual an out the motor comes with the clutch an flywheel still attached. If you unbolt the clutch, make sure you have 1 of those plastic alignment tools to put it back on. When you go to put the engine back in, have 1 person under the truck to line the input shaft on the trans up with the clutch as the motor goes back in. You might have to loosen the trans mount up to get it to wiggle a bit, but you shouldn't have to pull the trans if you don't want to. [/QUOTE]

Verification

Random media

BC546FED-288A-4AA3-A102-1A73FF7F1815

IMG_20130426_101656_1061

Magneto_side_v21

New set of gpz's

diamond eye exhaust 5

2012-04-24_18-46-02_422

Picture_852

Custom Ricky's Dash Mounts/H&S/Edge/Dashdaq

Latest posts

new build input welcomed
- Latest: btoler4th
- 4 minutes ago
6.4 Aftermarket
OEM LED sport headlights
- Latest: ghohouston
- Today at 8:37 AM
2017+ 6.7 Aluminum Super Duty
Gauge cluster face plates
- Latest: crash86
- Sunday at 5:15 PM
6.0 Aftermarket
B
6.4 head gasket job cost
- Latest: bowhunter
- Sunday at 2:07 PM
6.4 Aftermarket
S
6R140 surging issue
- Latest: Smokin 6.0
- Sunday at 12:11 AM
6.7 Tech & FAQ

Members online

btoler4th

Total: 398 (members: 1, guests: 397)

Top