Reply to thread

Message: [QUOTE="Harleyx, post: 1306624, member: 21993"] From my talks with the manufacturer, we are going to use a low pressure feed from the turbo oil supply to keep the three quart Reservoir full. The pumps are capable of 5000 psi but is all controlled by the amount of voltage supplied to the pump. I firmly believe that a stage 2 pump at 385.00 volume and pressure wise will be sufficient to supply my 340 150 with a single pump. With 400 to 500cc 8.0 mil plunger hybrids and monster nozzles 200 plus, there are pumps available to support any volume or pressure needed..... without any crazy belt routing all with 3/8 lines and check valves... I see a market getting ready to bust wide open once people see these [/QUOTE]

Verification

Random media

IMG_20170607_081955287

stacks

7420-Black_Front_Lite_bar_for_99-07_Ford_SD

0291

motor

IMAG0534

11050736_10153176647948050_1365818109064228304_n

Truck

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Today at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 803 (members: 0, guests: 803)

Top