Reply to thread

Message: [QUOTE="imelmo, post: 178939, member: 110"] So I have my truck back now. Had a couple things to button up like replace the fuel pump, put intercooler boots on, replace the ficm relay and a couple other small things. Only thing not installed right now is the coolant reservoir. Tried to start it. It turns over just fine and will hit but won't stay running. Tried using a little ether and it made it run a little longer but it still won't run on its own. While it was away all of the oil and all of the fuel was drained from everything though, so is it just going to take a while for everything to get filled back up and do I need to just keep cranking on it? Or should I be checking for anything else. Also, when it does hit, if I continue to crank on it the truck will not hit again. Any ideas? . [/QUOTE]

Verification

Random media

securedownload_2_

IMG_20130328_194115_589

spearco

262799_192838474108627_100001474272705_531056_1428326_n

251646_222002947818036_100000249972728_922377_5922724_n

past & present

dirt_jumpin

My Toys

20140706_190146

Hydroboost and power steering

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 1,089 (members: 0, guests: 1,089)

Top