Reply to thread

Message: [QUOTE="Arisley, post: 1279949, member: 67"] DO NOT bar the motor over with injectors removed. While that will shove fluid out in the cups, it will run right back down into the cylinders. And and oil in the HPOP will be pumped into the cylinders also. Remove glow plugs, put the covers on with a couple bolts finger tight. Bar the motor over two revolutions. You don't have to make any connections except batteries (leave the 42 pin connector unplugged and bump the starter over a few times. The reason for putting valve covers on is that oil comes out of the GP holes with enough force that it will make a huge mess on everything. [/QUOTE]

Verification

Random media

My OBS E-Fuel system

eleanor_part_two_34_

Mishimoto 6.4 radiator

My OBS E-Fuel system

Misc_037

C1FA78A7-6562-4476-83FF-4308DB52AE3D

IMAG1599

DE_4_Pipe

Weight Reduction,one part at a time

IMG_20150829_231111794

Ben's 96

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- 1 minute ago
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

Total: 735 (members: 2, guests: 733)

Top